Replacement Products
Match an installed shower roller, hinge, handle or fitting that needs replenishment or replacement.
Replacement · Reorder · New Sourcing
Product Matching & Sample Service
Send a product link, drawing, clear photographs or an approved physical sample. We help distributors identify glass hardware and screw specifications, compare available products and evaluate a practical supply route.
Manufacturing experience supplying products for sellers serving the U.S. Home Depot channel. Core glass hardware is manufactured at Foshan Anlan Hardware Factory, with screws and selected complementary products coordinated through specialist manufacturing partners.
✓ Photo & dimension review
✓ Drawing & link comparison
✓ Approved physical samples
✓ Distributor-friendly order review
When Matching Helps
Start from the reference you already have
You do not need to know the exact model name. The quality of the result depends on the available measurements, application details and reference condition.
Current Supplier Reference
Compare a product link, catalogue page, model number or existing purchased item with our supply range.
New Distributor Range
Use target products and market references to build a focused starting assortment for your customers.
Custom or Non-Standard Item
Review a drawing or approved sample to determine whether modification or new production is feasible.
Three Matching Routes
Use the simplest reliable reference
We begin with the information that is easiest for you to provide and request a stronger reference only when it is needed.
Best when the product is already shown on a supplier website, catalogue or existing purchase document.
Suitable for an initial comparison when clear multi-angle photos and critical measurements are available.
Preferred for difficult replacements, glass cut-outs, special threads, non-standard dimensions or close fit requirements.
Glass Hardware Matching
Show the product, glass preparation and installation
Glass hardware that appears similar may differ in mounting geometry, hole positions, wheel offset, handed direction, opening angle or mechanism.
- Front, rear, side and mounting photos
- Overall dimensions and centre-to-centre measurements
- Glass thickness, hole diameter and cut-out drawing
- Wheel diameter, wheel thickness and wheel arrangement
- Wall-to-glass, glass-to-glass, top, bottom or side mounting
- Opening direction, operating angle or soft-close requirement
- Material, finish, quantity and destination market
For replacement rollers: a photo beside a ruler is useful, but it does not replace a dimensional drawing or sample when fit is critical.
Screw & Fastener Matching
Define both the screw and its application
The same overall dimensions can be produced with different heads, drives, threads, points, materials and finishes. State how and where the screw will be used.
For a faster review: send the current supplier link, specification sheet or drawing together with the installed application and required quantity.
ApplicationWood, deck, sheet metal, furniture, cabinet, roofing, machinery or another assembly
DimensionsDiameter, length, thread length, pitch and washer dimensions where applicable
GeometryHead type, drive type, thread type and point type
Material304/316 stainless steel, carbon steel or another confirmed material
FinishCoating, plating, colour, appearance and intended exposure
StandardDIN, ISO or other stated reference, including revision or customer drawing where required
CommercialQuantity, unit packing, label, barcode, test and documentation requirements
Matching Process
Five controlled steps from reference to quotation
Each stage determines whether the available reference is sufficient or whether additional dimensions, a drawing or a physical sample is required.
Send Reference
Provide the link, photos, drawing, specifications and expected quantity.
Initial Review
We compare the product with our manufacturing and partner-supply scope.
Clarify Details
Missing measurements, materials, finishes and application information are identified.
Sample if Needed
Shipping instructions are confirmed before an approved physical sample is sent.
Match & Quote
Available match, alternative or development route is confirmed with order-specific terms.
Physical Sample Service
Contact us before sending any sample
A physical sample can improve matching accuracy, but it must be accepted and identified before shipment. Unsolicited parcels may be delayed, refused or impossible to link to an enquiry.
Do not ship samples until Sam confirms the receiving details, contact person and reference information in writing.
1. Obtain written acceptanceSend photos and the reason for matching first. We confirm whether a physical sample is useful.
2. Mark the reference clearlyInclude company name, contact, product name, quantity requirement and the agreed enquiry reference.
3. Confirm shipping responsibilityCourier, freight, customs declaration, duties and related costs are agreed before dispatch.
4. Protect the samplePack moving parts, glass-contact surfaces, threads and finishes to avoid transit damage.
5. Agree on testing and returnAny destructive inspection, disassembly, material test, sample retention or return must be confirmed in writing.
Clear Expectations
What the matching service can—and cannot—confirm
We can evaluate
- Existing catalogue match or the closest available alternative
- Manufacturing or coordinated partner-supply route
- Missing dimensions and specifications required for quotation
- Sample or drawing requirement for closer review
- Feasible material, finish, packing and quantity options
- Customisation route subject to technical and commercial review
We do not assume or guarantee
- An exact match based only on one photograph
- Material grade, coating or performance without suitable evidence or testing
- Compatibility with an installation we have not reviewed
- Ownership or permission to copy a protected design or brand
- Compliance for every destination market without stated requirements
- Sample return, destructive testing or development before written agreement
Frequently Asked Questions
Before requesting a product match
Can you identify a shower door roller from photos?
Often we can narrow the options, but a reliable match may still require wheel dimensions, body dimensions, mounting-hole information, glass thickness and a physical sample. One front photo is rarely enough for a critical replacement.
Can I send my current supplier's product link?
Yes. A public product link, catalogue reference or specification sheet is useful for comparison. We evaluate the available specification and do not reproduce another company's protected branding or confidential information.
Can you copy a custom screw from a physical sample?
Feasibility depends on the dimensions, thread, head, drive, point, material, finish, quantity and permitted manufacturing route. A drawing or measured specification may still be required, and material or coating cannot always be identified by appearance alone.
Do I need to send a sample for every product?
No. Standard products can often be reviewed from a clear link, model, drawing or complete specification. A physical sample is more useful for difficult replacement products, non-standard geometry or fit-sensitive glass hardware.
Who pays for sample shipping and customs charges?
Shipping responsibility, declared information, duties, taxes and any return arrangement must be agreed before dispatch. Do not ship an unsolicited sample or use our receiving details without written confirmation.
Will my physical sample be returned?
Not automatically. Return, retention, disassembly and destructive testing must be confirmed in writing before the sample is sent. Return courier and related costs also need to be agreed.
Can you match small quantities for a trial order?
We focus on small and mid-sized distributors, so practical trial quantities can be reviewed. However, MOQ depends on the product, material, finish, production route and packaging and is confirmed item by item.
Send the product reference you already have
Start with a link, drawing or clear multi-angle photos. Add the expected quantity, destination and packaging requirement, and Sam will identify the next information needed.